전체상품목록 바로가기

본문 바로가기

뒤로가기

상품상세 정보

Holybro 100mW Telemetry Radio 915Mhz set - 픽스호크 아크로사

(해외배송 가능상품)
기본 정보
상품명 Holybro 100mW Telemetry Radio 915Mhz set - 픽스호크 아크로사
상품코드 P00000GJ
판매가 120,000원
QR코드
qrcode
이미지로 저장코드URL 복사트위터로 보내기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드
상품 목록
상품명 상품수 가격
Holybro 100mW Telemetry Radio 915Mhz set - 픽스호크 아크로사 수량증가 수량감소 120000 (  0)
옵션 정보
TOTAL (QUANTITY)0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

대량구매문의

Event

[Holybro] SiK Telemetry Radio V3
악세사리 화이트 색상 이미지-S1L27
악세사리 오트밀 색상 이미지-S1L28
악세사리 상품상세 이미지-S1L3
This Holybro SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m “out of the box” 
(the range can be extended to several kilometres with the use of a patch antenna on the ground). 

This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station.

 It uses open source firmware which has been specially designed to work well with MAVLink packets and 
to be integrated with the Mission Planner, Ardupilot, QGroundControl, PX4 Autopilot. 

The radios can be either 915Mhz or 433Mhz and you should purchase the model which is appropriate for your country/region. 

Features
Open-source SIK firmware 
Plug-n-play for Pixhawk Standard Flight Controller 
Easiest way to connect your Autopilot and Ground Station 
Interchangeable air and ground radio 
Micro-USB port (Type-C Adapter Cable Included)
6-position JST-GH connector

Specification
100 mW maximum output power (adjustable) -117 dBm receive sensitivity
RP-SMA connector
2-way full-duplex communication through adaptive TDM UART interface
Transparent serial link
MAVLink protocol framing
Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle
Error correction corrects up to 25% of bit errors Open-source SIK firmware
Configurable through Mission Planner & APM Planner

Dimension
28 x 53 x 10.7mm (without antenna)

Electrical Data
Supply voltage: 5V DC (from USB or JST-GH)
Transmit current: 100 mA at 20dBm
Receive current: 25 mA
Serial interface: 3


LED and Connection

악세사리 오트밀 색상 이미지-S1L6

LEDs Indicators Status 
The radios have 2 status LEDs, one red and one green. 
Green LED blinking - searching for another radio 
Green LED solid - link is established with another radio 
Red LED flashing - transmitting data 
Red LED solid - in firmware update mode

Connecting to Pixhawk Standard Flight Controller
Use the 6 pin JST-GH connector that come with the radio to connect the radio to your flight controller's “Telem 1” (“Telem 2” can also be used but the default recommendation is “Telem1”).

Connecting to a PC or Ground Station
Connecting the radio to your Windows PC or Ground Station is as simple as connecting the micro/type-C USB cable 
(both included with the radio) to your PC/Ground Station. 
The necessary drivers should be installed automatically and the radio will appear as a new “USB Serial Port” in the Windows Device Manager under Ports (COM & LPT). The Mission Planner’s COM Port selection drop-down should also contain the same new COM port.


Multiple Point to Point Setup with Sik Radio


Telemetry Radio Setup

You can use multiple Point to Point telemetry modules with the Holybro SiK Telemetry Radio V3.

악세사리 화이트 색상 이미지-S1L7
악세사리 -S1L34

PAYMENT INFO


DELIVERY INFO

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :

EXCHANGE INFO


SERVICE INFO