뒤로가기
![]()
![]()
![]()
Overview
The Pixhawk 6X-RT is based on the Pixhawk® FMUv6X-RT Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk 6X-RT flight controller, you can find an NXP-based i.MXRT1176 MCU, paired with sensor technology from Bosch® and InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle.
The i.MXRT1176 microcontroller contains an Arm® Cortex-M7 at 1 GHz and a Cortex-M4 at 400 MHz. It has 2MB SRAM and 64MB Octal SPI Flash. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
It includes high-performance, low-noise IMUs designed for better stabilization, and has triple redundant IMUs & double redundant barometers on separate buses. When the Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability. An independent LDO powers every sensor set with independent power control. A vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. An integrated Microchip Ethernet PHY, high-speed communication with mission computers via Ethernet is now possible.
The Pixhawk 6X-RT is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application. This Flight controller is compatible with any baseboard that uses the Pixhawk Autopilot bus, such as the Pixhawk Baseboard, Pixhawk Mini Baseboard, and Pixhawk RPi CM4 Baseboard.
Key Design Points
상품상세 정보
현재 위치
Holybro Pixhawk 6X-RT (Developer Edition) 픽스호크 아크로사
(해외배송 가능상품)| 상품명 | Holybro Pixhawk 6X-RT (Developer Edition) 픽스호크 아크로사 |
|---|---|
| 상품코드 | P0000CVG |
| 판매가 | 540,600원 |
| QR코드 |    |
| 옵션선택 |
(최소주문수량 1개 이상 / 최대주문수량 0개 이하)
사이즈 가이드추가구성상품 추가로 구매를 원하시면 선택하세요.
추가구성상품 닫기
TOTAL (QUANTITY)0 (0개)
할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.
Event
[Holybro] Pixhawk 6X-RT (Developer Edition)
Overview
The Pixhawk 6X-RT is based on the Pixhawk® FMUv6X-RT Open Standard and the Pixhawk® Autopilot Bus Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk 6X-RT flight controller, you can find an NXP-based i.MXRT1176 MCU, paired with sensor technology from Bosch® and InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle.
The i.MXRT1176 microcontroller contains an Arm® Cortex-M7 at 1 GHz and a Cortex-M4 at 400 MHz. It has 2MB SRAM and 64MB Octal SPI Flash. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models.
It includes high-performance, low-noise IMUs designed for better stabilization, and has triple redundant IMUs & double redundant barometers on separate buses. When the Autopilot detects a sensor failure, the system seamlessly switches to another to maintain flight control reliability. An independent LDO powers every sensor set with independent power control. A vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. An integrated Microchip Ethernet PHY, high-speed communication with mission computers via Ethernet is now possible.
The Pixhawk 6X-RT is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial application. This Flight controller is compatible with any baseboard that uses the Pixhawk Autopilot bus, such as the Pixhawk Baseboard, Pixhawk Mini Baseboard, and Pixhawk RPi CM4 Baseboard.
Key Design Points
- High performance dual core i.MXRT1176 Processor with Cortex-M7 @ 1GHz – Cortex-M4 @ 400MHz
- Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
- Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
- Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
- Vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
- Ethernet interface for high-speed mission computer integration
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
- Hardware secure element NXP EdgeLock SE051 an extension to the widely trusted EdgeLock SE050 Plug & Trust secure element family, supports applet updates in the field and delivers proven security certified to CC EAL 6+, with AVA_VAN.5 up to the OS level, for strong protection against the most recent attack scenarios.. E.g to securely store operator ID
- This developer edition for early adopters while we continue to accumulate flight test hours
- This Flight Controller is currently support in PX4 Flight Stack only. (Firmware Target: FMUv6xrt). It is not supported in Ardupilot.
- This Flight controller uses digital power module (same as Pixhawk 6X, full list can be found here) Power module comparison chart
- MCU: i.MXRT1176
- Cortex-M7 @ 1GHz
- Cortex-M4 @ 400MHz
- 2MB SRAM
- 64MB Octal SPI Flash
- IO Processor: STM32F103
- 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
- On-board sensors
- Accel/Gyro: BMI088
- Accel/Gyro: ICM-42670-P
- Accel/Gyro: ICM-42686-P
- Mag: BMM150
- Barometer: 2x BMP388
- Hardware secure element
- NXP EdgeLock SE051C2
- SDHC interface
- 12-Channel PWM
- 8x UART
- 4x I2C
- 6x SPI
- 3x CAN-FD
- RMII 100M Ethernet
- USB
- Open-Source Software enablement
- PX4 Autopilot
- NuttX RTOS
- Zephyr RTOS
- Pixhawk 6X-RT Flight Controller Module
- Pixhawk Standard Base(옵션1)/Pixhawk Mini Base(옵션2)
- PM02D HV Power Module
- Cable Set
- Firmware Flashing Instruction (Github)
- PX4 on the NXP IMXRT1176 1 GHz MCU - Presentation slides by NXP
- i.MX RT1176 – product page 1 GHz Crossover MCU with Arm® Cortex® Cores
- EdgeLock® SE051: Proven, Easy-to-Use IoT Security Solution with Support for Updatability and Custom Applets
Recommend For You회원님을 위한 추천상품
-
454,000원454,000원 -
521,200원521,200원 -
590,000원590,000원 -
355,800원355,800원 -
540,000원540,000원
REVIEW
게시물이 없습니다
Q&A
게시물이 없습니다
PAYMENT INFO
DELIVERY INFO
- 배송 방법 : 택배
- 배송 지역 : 전국지역
- 배송 비용 : 4,000원
- 배송 기간 : 3일 ~ 7일
- 배송 안내 :
EXCHANGE INFO
SERVICE INFO
