전체상품목록 바로가기

본문 바로가기

뒤로가기

상품상세 정보

CubePilot ADS-B Carrier Board 픽스호크 아크로사

(해외배송 가능상품)
기본 정보
상품명 CubePilot ADS-B Carrier Board 픽스호크 아크로사
상품코드 P00000DL
판매가 232,500원
QR코드
qrcode
이미지로 저장코드URL 복사트위터로 보내기

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션선택

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

사이즈 가이드
상품 목록
상품명 상품수 가격
CubePilot ADS-B Carrier Board 픽스호크 아크로사 수량증가 수량감소 232500 (  0)
옵션 정보
TOTAL (QUANTITY)0 (0개)

할인가가 적용된 최종 결제예정금액은 주문 시 확인할 수 있습니다.

대량구매문의

Event

[CubePilot] ADS-B Carrier Board 
가방 그레이블루 색상 이미지-S1L2
가방 차콜 색상 이미지-S1L3
가방 화이트 색상 이미지-S1L4
가방 상품 이미지-S1L5
SIZE: 94.5X44.3X17.3mm
This is an updated version of the original carrier board, its overall footprint is identical to the previous versions and main changes compared to original carrier are as follows:

▼Integration of uAvionix ADS-B IN Receiver
▼Built-In ADS-B Antenna 
▼Removal of Intel Edison Bay and Debug USB Ports
▼New Product Livery 
▼Correct labelling Of CAN Ports 
▼All other specification and external connections remain identical to the original board apart from the following

uAvionix ADS-B Receiver
The new carrier board has an integrated 1090Mhz ADS-B IN receiver from uAvionix, this allows users to detect ADS-B OUT equip aircraft in the area and displays information such as the Position, Altitude, Speed and ID of the detected aircraft on a connected ground station. This also allow sense and avoid features included in Ardupilot to be used if configured.

This ADS-B receiver is connected to the internal serial 5 Port, this is compatible with Ardupilot, Mission Planner and QGC.This system will 

Configuration

To enable ADSB in Ardupilot to detect aircraft on ground station you need to be using Copter or Plane 4.0 onward for the Cube Orange and set the following parameters
▼ADSB_ENABLE = 1 Enable ADS-B (Disabled as default)
▼SERIAL5_BAUD = 57 Set baud rate
▼SERIAL5_PROTOCOL = 1 Set protocol
▼SR0_ADSB = 2 Set ADSB stream rate to ground station
Note: You may need to set SR1_ADSB = 2 to enable receiving on ground station on Telem 1 or SR2 for Telem 2.

For Advanced users you can set the ADS-B Alarm and Sens and Avoid with the following parameters

▼AVD_ENABLE = 1 Enable alarm and avoidance using ADSB
▼AVD_W_ACTION = 1 (0=Disable, 1=Enable ) Enable Warnings 
▼AVD_F_ACTION = 1 Controls how the vehicle should respond to a projected near-miss (i.e. 0= None, 1= Report, 2=Climb Or Descend, 3=Move Horizontally, 4=Move Perpendicularly in 3D, 5=RTL or 6=Hover)
▼AVD_F_RCVRY = 3 sets how the vehicle will behave after the vehicle has cleared the near-miss area (i.e. 0 = Remain in EXCER_ADSB, 1 = resume previous flight mode, 2 = RTL, 3 = Resume if AUTO else Loiter)
가방 -S2L3

PAYMENT INFO


DELIVERY INFO

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 :

EXCHANGE INFO


SERVICE INFO